why only electricity transfer through electric wire's? and how can transfer electricity wireless? plzz explain.
Answers
Answer:
Explanation:
WPT (Wireless Power Transmission) Technology
WPT technology is an old technology and it was demonstrated by “Nikola Telsa” in the year 1980. Wireless power transmission mainly uses three main systems such as microwaves, solar cells and resonance. Microwaves are used in an electrical device to transmit electromagnetic radiation from a source to a receiver. Accurately the name WPT states that, the electrical power can be transferred from a source to a device without using wires. Basically, it includes two coils they are a transmitter coil & a receiver coil. Where the transmitter coil is powered by AC current to create a magnetic field, which in turn induces a voltage in the receiver coil.
Wireless Power Transmission Technology
Wireless Power Transmission Technology
The basics of wireless power transmission include the inductive energy that can be transmitted from a transmitter coil to a receiver coil through an oscillating magnetic field. The DC current supplied by a power source is changed into high frequency AC current by particularly designed electronics built into the transmitter.
In the TX (transmitter) section, the AC current increases a copper wire, that creates a magnetic field. Once an RX (Receiver) coil is located near to the magnetic field, then the magnetic field can induce an AC current in the receiving coil. Electrons in the receiving device, converts the AC current back into DC current, that becomes working power.
Wireless Power Transfer Circuit
The simple wireless power transmission circuit is shown below. The required components of this circuit mainly include 20-30 magnet wire (gauge copper wire), A battery-1, transistor (2N2222) and LED.The construction of this circuit comprises of a transmitter and a receiver.
Wireless Power Transfer Circuit
Wireless Power Transfer Circuit
Transmitter
Take a PVC pipe and whirl a wire on it seven times after whirling a wire about three inches make a loop for center terminal and continue the process. Now take transistor 2N2222 and connect its base terminal to one end of the copper coil, the collector terminal to the other end of the copper coil and now connect the emitter terminal to the negative (–ve) terminal of AA battery. The center terminal of the copper coil will be connected with the positive (+ve) terminal of an AA battery. When then the receiver coil is placed 1 inch above of the transmitter coil, then the LED will blink.
Receiver
Make a 15 turn copper coil and connect a light emitting diode to its ends.
Wireless Power Transfer Circuit Working
The wireless power transmission can be defined as, the energy can be transmitted from the transmitter to a receiver through an oscillating magnetic field.
X
To accomplish this, power source (DC current) is changed into high frequency AC (Alternating Current) by particularly designed electronics erected into the transmitter. The AC boosts a copper wire coil in the transmitter, which produces a magnetic field. When the receiver coil is placed in proximity of the magnetic field, the magnetic field can make an AC (alternating current) in the receiving coil. Electronics in the receiving coil then alters the AC back into DC which becomes operating power.
Application of Wireless Power Transfer
The main intention of this project is to design a WPT system in 3D space (transfer power within a small range) and the block diagram of this project is shown below.The block diagram of the wireless power transfer mainly builds with HF transformer, capacitors, diode, rectifier, inductor coil filled with air and lamp.
The person is mandatory to be worked every year to change the battery. This project is designed to charge a rechargeable battery wirelessly. Since charging of the battery is not possible to be demonstrated, we are providing a DC fan that runs through wireless power.
Application of Wireless Power Transfer by Edgefxkits.com
Application of Wireless Power Transfer by Edgefxkits.com
Thus the power transfer can be done with the transmitter (primary) to the receiver (secondary) that is separated by a considerable distance (say 3cm). Therefore the power transfer could be seen as the TX transmits and the RX receives the power to run a load.
Moreover, WPT technique can be used to charge the gadgets like mobile phone, laptop battery, iPod, propeller clock, etc. And also this sort of charging offers a far lower risk of electrical shock. Furthermore, this project can be enhanced by increasing the distance of power transfer as the research across the world is still going on
plz mark brainliest
Answer:
IN electric wire in wire copper is there that's why electricity conflor there