Write a note on bandwidth of signals.
Answers
Passband bandwidth is the difference between the upper and lower cutoff frequencies of, for example, a band-pass filter, a communication channel, or a signal spectrum. Baseband bandwidth applies to a low-pass filter or baseband signal; the bandwidth is equal to its upper cutoff frequency.
Hope this answer will help you..《《
Answer:
ON BANDWIDTH OF SIGNALS
Explanation:
Bandwidth
We all know that most signals are transmitted in terms of electromagnetic or radio waves. As we have come across in the discussions on the topics of Amplitude Modulation and Frequency Modulation, the original signal is superimposed on a carrier signal or changes its frequency to carry the information from the sender to the receiver where it is demodulated and converted back into the original signal.
Every signal is composed of a large number of wavelengths of different frequencies and this signal is unique in terms of its composition. This brings us to the methods employed in the process of identification of the signal. This is where the concept of Bandwidth comes into the picture. So, what is Bandwidth of a signal?
Browse more Topics Under Communication Systems
Basic Terminology Used in Communication Systems
Propagation of Electromagnetic Wave
Bandwidth of Signals
Bandwidth of Transmission Medium
Modulation and Its Necessity
Amplitude Modulation
Production of Amplitude Modulated Wave
Detection of Amplitude Modulated Wave
Bandwidth of Signals
Bandwidth
The bandwidth of a signal is defined as the difference between the upper and lower frequencies of a signal generated. As seen from the above representation, Bandwidth (B) of the signal is equal to the difference between the higher or upper-frequency (fH) and the lower frequency (fL). It is measured in terms of Hertz(Hz) i.e. the unit of frequency.
Let’s understand this better with the help of an example. Whenever you tune into a radio you find various stations at varying particular frequencies. The bandwidth of FM radio is 200 KHz from 88.1 MHz to 101.1 MHz for most places. As you tune, the radio you find various stations at various frequencies.
Neither do all the channel occupy all the frequencies nor is there no channel at every frequency, but every channel has its own unique frequency like an ID.
Given above is a diagram representing various bandwidths of electromagnetic waves and it goes a long way in helping identify the type of wave on basis of its frequency and thus determining its applications. Thus we see that bandwidths exist for all kinds of waves in both the visual and audio spectrums and well beyond them as well.
The audible bandwidth of human ear ranges from 20 Hz to 20,000Hz. Sounds below 20Hz are known as Infrasonic and sounds above 20000Hz are known as ultrasonic. Dogs can hear ultrasonic sounds. Whereas Blue whales can produce infrasonic sounds. So let us now study some applications of various signals in various bandwidths.
Video on Communication System
Applications of Signal Bandwidth
Ultrasound
Medical uses of sound signals with a frequency of more than 20000Hz is done to determine the health and condition of internal organs or during a pregnancy to determine the growth of a foetus.
Radar
An acronym for “Radio Detection And Ranging”; RADAR uses sounds of very high frequencies typically of the order of 1 to 3 MHz and is used in applications related to space, defense, engineering, metal studies etc.
Thus we have studied the concept of Bandwidth of a signal and determined its applications and limitations. Sound knowledge of the concepts discussed here will help the reader in understanding the various complexities and operational requirements of the real-life systems.
Solved Example for You
Question: A given signal has frequencies of 3125 MHz, 635 MHz, 2000MHz and 7000Mhz. Determine the bandwidth of the signal?
Answer: The bandwidth of a signal is the difference between the highest and the lowest frequencies. For the given system the bandwidth is 7000 – 635 = 6365MHz. Therefore the bandwidth of the signal is 6365MHz