Biology, asked by jamilpatel12345, 11 months ago

Write a note on production of yoghurt

Answers

Answered by kavitapurshottam
12
The fermentation of lactose by these bacteria produces lactic acid, which acts on milk protein to give yogurt its texture and characteristic tart flavor. Cow's milk is commonly available worldwide and, as such, is the milk most commonly used to make yogurt.
Answered by imadalam2112
2

Yogurt Production

This page describes the production of yogurt and includes the legal Yogurt Definitions, Ingredients, Bacterial Cultures, and General Manufacturing Procedure.

Ingredients

The main ingredient in yogurt is milk. The type of milk used depends on the type of yogurt – whole milk for full fat yogurt, lowfat milk for lowfat yogurt, and skim milk for nonfat yogurt. Other dairy ingredients are allowed in yogurt to adjust the composition, such as cream to adjust the fat content, and nonfat dry milk to adjust the solids content. The solids content of yogurt is often adjusted above the 8.25% minimum to provide a better body and texture to the finished yogurt. The CFR contains a list of the permissible dairy ingredients for yogurt.

Stabilizers may also be used in yogurt to improve the body and texture by increasing firmness, preventing separation of the whey (syneresis), and helping to keep the fruit uniformly mixed in the yogurt. Stabilizers used in yogurt are alginates (carageenan), gelatins, gums (locust bean, guar), pectins, and starch.

Sweeteners, flavors and fruit preparations are used in yogurt to provide variety to the consumer. A list of permissible sweeteners for yogurt is found in the CFR.

Other bacterial cultures, such as Lactobacillus acidophilus, Lactobacillus subsp. casei, and Bifido-bacteria may be added to yogurt as probiotic cultures. Probiotic cultures benefit human health by improving lactose digestion, gastrointestinal function, and stimulating the immune system.

General Manufacturing Procedure

The following flow chart and discussion provide a general outline of the steps required for making yogurt. For a more detailed explanation see the literature references by Staff (1998), Tamime and Robinson (1999), Walstra et al. (1999) and the website by Goff, www.foodsci.uoguelph.ca/dairyedu/yogurt.html.

General Yogurt Processing Steps

Adjust Milk Composition & Blend Ingredients

Pasteurize Milk

Homogenize

Cool Milk

Inoculate with Starter Cultures

Hold

Cool

Add Flavors & Fruit

Package

1. Adjust Milk Composition & Blend Ingredients

Milk composition may be adjusted to achieve the desired fat and solids content. Often dry milk is added to increase the amount of whey protein to provide a desirable texture. Ingredients such as stabilizers are added at this time.

2. Pasteurize Milk

The milk mixture is pasteurized at 185°F (85°C) for 30 minutes or at 203°F (95°C) for 10 minutes. A high heat treatment is used to denature the whey (serum) proteins. This allows the proteins to form a more stable gel, which prevents separation of the water during storage. The high heat treatment also further reduces the number of spoilage organisms in the milk to provide a better environment for the starter cultures to grow. Yogurt is pasteurized before the starter cultures are added to ensure that the cultures remain active in the yogurt after fermentation to act as probiotics; if the yogurt is pasteurized after fermentation the cultures will be inactivated.

3. Homogenize

The blend is homogenized (2000 to 2500 psi) to mix all ingredients thoroughly and improve yogurt consistency.

4. Cool Milk

The milk is cooled to 108°F (42°C) to bring the yogurt to the ideal growth temperature for the starter culture.

5. Inoculate with Starter Cultures

The starter cultures are mixed into the cooled milk.

6. Hold

The milk is held at 108°F (42°C) until a pH 4.5 is reached. This allows the fermentation to progress to form a soft gel and the characteristic flavor of yogurt. This process can take several hours.

7. Cool

The yogurt is cooled to 7°C to stop the fermentation process.

8. Add Fruit & Flavors

Fruit and flavors are added at different steps depending on the type of yogurt. For set style yogurt the fruit is added in the bottom of the cup and then the inoculated yogurt is poured on top and the yogurt is fermented in the cup. For swiss style yogurt the fruit is blended with the fermented, cooled yogurt prior to packaging.

9. Package

The yogurt is pumped from the fermentation vat and packaged as desired.

HOPE IT HELPSSS.

KINDLY MARK IT AS BRAINLIEST..

Similar questions