Question

Write any Two ways of checking Noise pollution
Spam answer will be reported

Answer 1

Answer:

By using instruments like :

The most common instruments used for measuring noise are -

The Sound Level Meter (SLM)

The Integrating Sound Level Meter (ISLM) and

The noise dosimeter

Answer 2

Explanation:

Sound waves are vibrations of air molecules carried from a noise source to the ear. Sound is typically described in terms of the loudness (amplitude) and the pitch (frequency) of the wave. Loudness (also called sound pressure level, or SPL) is measured in logarithmic units called decibels (dB). The normal human ear can detect sounds that range between 0 dB (hearing threshold) and about 140 dB, with sounds between 120dB and 140 dB causing pain (pain threshold). The ambient SPL in a library is about 35 dB, while that inside a moving bus or subway train is roughly 85 dB; building construction activities can generate SPLs as high as 105 dB at the source. SPLs decrease with distance from the source.

BRITANNICA EXPLORES

EARTH'S TO-DO LIST

Human action has triggered a vast cascade of environmental problems that now threaten the continued ability of both natural and human systems to flourish. Solving the critical environmental problems of global warming, water scarcity, pollution, and biodiversity loss are perhaps the greatest challenges of the 21st century. Will we rise to meet them?

The rate at which sound energy is transmitted, called sound intensity, is proportional to the square of the SPL. Because of the logarithmic nature of the decibel scale, an increase of 10 dB represents a 10-fold increase in sound intensity, an increase of 20 dB represents a 100-fold increase in intensity, a 30-dB increase represents a 1,000-fold increase in intensity, and so on. When sound intensity is doubled, on the other hand, the SPL increases by only 3 dB. For example, if a construction drill causes a noise level of about 90 dB, then two identical drills operating side by side will cause a noise level of 93 dB. On the other hand, when two sounds that differ by more than 15 dB in SPL are combined, the weaker sound is masked (or drowned out) by the louder sound. For example, if an 80-dB drill is operating next to a 95-dB dozer at a construction site, the combined SPL of those two sources will be measured as 95 dB; the less intense sound from the compressor will not be noticeable.

Frequency of a sound wave is expressed in cycles per second (cps), but hertz (Hz) is more commonly used (1 cps = 1 Hz). The human eardrum is a very sensitive organ with a large dynamic range, being able to detect sounds at frequencies as low as 20 Hz (a very low pitch) up to about 20,000 Hz (a very high pitch). The pitch of a human voice in normal conversation occurs at frequencies between 250 Hz and 2,000 Hz.