Question

- Write sequence for straight and cross cabling.​

Answer 1

Explanation:

Step 1: Strip the cable jacket about 1.5 inch down from the end.

Step 2: Spread the four pairs of twisted wire apart. ...

Step 3: Untwist the wire pairs and neatly align them in the T568B orientation. ...

Step 4: Cut the wires as straight as possible, about 0.5 inch above the end of the jacket.

Answer 2

Explanation:

A Crossover cable is a type of CAT 5 where one end isT568A configuration and the other end as T568BConfiguration. In this type of cable connection, Pin 1 is crossed with Pin 3, and Pin 2 is crossed with Pin 6.

Crossover cable is used to connect two or more computing devices. The internal wiring of crossover cables reverses the transmission and receive signals. It is widely used to connect two devices of the same type: e.g., two computers or two switches to each other.

In regard to physical appearance, Crossover Ethernet cables are very much similar to regular Ethernet cables. Still, they are different with regard to the order with which the wires are arranged. This type of Ethernet cable is made to connect to network devices of the same kind over Ethernet directly. Crossover cables are mostly used to connect two hosts directly.

hope it helps you out