Question

write short notes on:
a) Primary memory
b) Secondary memory
c) Characteristics of a computer

Answer 1

Explanation:

In computing, memory refers to a device that is used to store information for immediate use in a computer or related computer hardware device.[1] It typically refers to semiconductor memory, specifically metal–oxide–semiconductor (MOS) memory,[2][3] where data is stored within MOS memory cells on a silicon integrated circuit chip. The term "memory" is often synonymous with the term "primary storage". Computer memory operates at a high speed, for example random-access memory (RAM), as a distinction from storage that provides slow-to-access information but offers higher capacities. If needed, contents of the computer memory can be transferred to secondary storage; a very common way of doing this is through a memory management technique called "virtual memory". An archaic synonym for memory is store.[4]

The term "memory", meaning "primary storage" or "main memory", is often associated with addressable semiconductor memory, i.e. integrated circuits consisting of silicon-based MOS transistors[5], used for example as primary storage but also other purposes in computers and other digital electronic devices. There are two main kinds of semiconductor memory, volatile and non-volatile. Examples of non-volatile memory are flash memory (used as secondary memory) and ROM, PROM, EPROM and EEPROM memory (used for storing firmware such as BIOS). Examples of volatile memory are primary storage, which is typically dynamic random-access memory (DRAM), and fast CPU cache memory, which is typically static random-access memory (SRAM) that is fast but energy-consuming, offering lower memory areal density than DRAM.

Most semiconductor memory is organized into memory cells or bistable flip-flops, each storing one bit (0 or 1). Flash memory organization includes both one bit per memory cell and multiple bits per cell (called MLC, Multiple Level Cell). The memory cells are grouped into words of fixed word length, for example 1, 2, 4, 8, 16, 32, 64 or 128 bit. Each word can be accessed by a binary address of N bit, making it possible to store 2 raised by N words in the memory. This implies that processor registers normally are not considered as memory, since they only store one word and do not include an addressing mechanism.

Typical secondary storage devices are hard disk drives and solid-state drives.

Answer 2

(a) Primary memory is the main memory of the computer system. Accessing data from primary memory is faster because it is an internal memory of the computer. The primary memory is most volatile which means data in primary memory does not exist if it is not saved when a power failure occurs

(b) All secondary storage devices which are capable of storing high volume data is referred to secondary memory. It's slower than primary memory. However, it can save a substantial amount of data, in the range of gigabytes to terabytes. This memory is also called backup storage or mass storage media.

(c) A computer works with much higher speed and accuracy compared to humans

Computers perform calculations with 100% accuracy

Versatility refers to the capability of a computer to perform different kinds of works with same accuracy and efficiency.

hope it helps

please mark me as branliest