write the step for water purification
Answers
Screening
Water from lakes, rivers or the ground passes through a screen as it enters the water treatment plant. When the water source is a lake or river, the screen serves an important function, keeping out large natural contaminants such as plants and wood, or fish. If ground water is used, screening may not be necessary since the water has passed through layers of the earth in what is essentially a natural screening function.
Coagulation
Treatment plant workers add alum and other chemicals to the water, which cause tiny sticky particles, or floc, to form. These floc attract dirt particles, making them eventually heavy enough to sink to the bottom of the water storage tank.
Sedimentation
The water and floc flow into a sedimentation basin. As the water sits there, the heavy floc settle to the bottom, where they remain until removal.
Filtration
Water passes through layers of gravel, sand and perhaps charcoal, which serve to filter out any remaining particles. The gravel layer is often about 1 foot deep and the sand layer about 2½ feet deep.
Disinfection
Water goes into a closed tank or reservoir. Chlorine or other disinfecting chemicals kill any remaining microorganisms or bacteria in the water and help keep the water clean until distribution. If a water treatment facility uses ground water as its only water source, disinfection may be the only step required to sufficiently treat the water. After it is disinfected, the purified water sits in the closed tank or reservoir until it flows through pipes to homes and businesses.
hey can you mark me as brainliest pls I need to level up
Answer:
Community Water Treatment
Coagulation and Flocculation. Coagulation and flocculation are often the first steps in water treatment.
Sedimentation. During sedimentation, floc settles to the bottom of the water supply, due to its weight.
Filtration.
Disinfection.
Explanation: