you are given an iron strip. how will you make it into a magnet?
please give my short answer
Answers
Answer:
Explanation:
“Touch and Stroke” method is used to make an iron strip into a magnet.
Take a rectangular piece of iron bar.
Take a bar magnet and keep in contact with one of its poles with one edge of the bar of iron.
Without lifting the bar magnet, move it along the length of the iron bar till you reach the other end.
Lift the magnet and bring the pole (the same pole you started with) to the same point of the iron bar from which we began.
Move the magnet again along the iron bar in the same direction as you did before.
Repeat this process about 30-40 times.
Bring few all pins near to the iron bar and check if it is converted to a magnet or not.
Answer:
Place the iron strip on a table. Place one pole of a bar magnet near one end of the iron strip. ... Then, lift the magnet and bring the pole to the starting point and move in the same direction as before. On repeating this process for at least 30-40 times, the iron strip will become a bar magnet with two poles
Explanation:
Plz make ME brainlist and thanks