Question

You are using the world record microcrystalline cell process to make one cell in a module. The IV curve for this cell is shown below, along with the ISC, VOC, and voltage and current at maximum power point (VMPP and IMPP). You can check that it has a fill factor of 75%. Note:pLEASE refer the picture below Each cell in the module has an area of 100 cm2. The TCO you will use in the module adds a series resistance of 0.02 ohm. If we assume that both the short circuit current and the IMPP do not change when the effect of the new TCO is taken into account, estimate the new fill factor (in %) of this solar cell.

Answer 1

Answer:

gvg f z a good night you said eyes are so beautiful you are a very happy g y egg j