Question

zubeda made an electric circuit using a cell holder a switch and a bulb when she put the switch in the on position the bulb did not glow help zubeda in and identify the possible defects in the circuit

Answer 1

》Wires aren't connected properly
》bulb is already fuse
》current flowing is not enough to glow the bulb.

Answer 2

Answer:

One of the reasons may be that the rubber band used in the cell holder may not be tight enough to keep the two cells in contact with each other. If the cells are not in proper contact with each other, then the circuit will not be complete and current will not flow through the circuit. Hence, the bulb will not glow.

The other reason may be that the two cells are not connected properly. The negative terminal of one cell must be connected to the positive terminal of the other cell.