A device to remove the sludge in a WWTP (waste water treatment plant) _____
helpp
Answers
Answer:
The residue that accumulates in sewage treatment plants is called sludge (or biosolids). Sewage sludge is the solid, semisolid, or slurry residual material that is produced as a by-product of wastewater treatment processes. This residue is commonly classified as primary and secondary sludge. Primary sludge is generated from chemical precipitation, sedimentation, and other primary processes, whereas secondary sludge is the activated waste biomass resulting from biological treatments. Some sewage plants also receive septage or septic tank solids from household on-site wastewater treatment systems. Quite often the sludges are combined together for further treatment and disposal.
sewage sludge treatment
sewage sludge treatment
Mixed sludge received from secondary wastewater treatment is passed through a dissolved-air flotation tank, where solids rise to the surface and are skimmed off. The thickened sludge is pulped with steam, then passed to thermal hydrolysis, where large molecules such as proteins and lipids are broken down under heat and pressure. The hydrolyzed sludge is passed through a flash tank, where a sudden drop in pressure causes cells to burst, and then to anaerobic digestion, where bacteria convert dissolved organic matter to biogas (which can be used to fuel the treatment process). Digested sludge is passed through a dewatering step; the dried solids are disposed of, and the water is sent back to secondary treatment.
Explanation:
pls mark me brainliest