A distributed line consists of two straight parallel conductors
Answers
Explanation:
You might expect that there are significant forces between current-carrying wires, since ordinary currents produce significant magnetic fields and these fields exert significant forces on ordinary currents. But you might not expect that the force between wires is used to define the ampere. It might also surprise you to learn that this force has something to do with why large circuit breakers burn up when they attempt to interrupt large currents.
The force between two long straight and parallel conductors separated by a distance r can be found by applying what we have developed in preceding sections. Figure 1 shows the wires, their currents, the fields they create, and the subsequent forces they exert on one another. Let us consider the field produced by wire 1 and the force it exerts on wire 2 (call the force F2). The field due to I1 at a distance r is given to be
B
1
=
μ
0
I
1
2
π
r
.
Figure a shows two parallel wires, both with currents going up. The magnetic field lines of the first wire are shown as concentric circles centered on wire 1 and in a plane perpendicular to the wires. The magnetic field is in the counter clockwise direction as viewed from above. Figure b shows a view from above and shows the current-carrying wires as two dots. Around wire one is a circle that represents a magnetic field line due to that wire. The magnetic field passes directly through wire two. The magnetic field is in the counter clockwise direction. The force on wire two is to the left, toward wire one.
Figure 1. (a) The magnetic field produced by a long straight conductor is perpendicular to a parallel conductor, as indicated by RHR-2. (b) A view from above of the two wires shown in (a), with one magnetic field line shown for each wire. RHR-1 shows that the force between the parallel conductors is attractive when the currents are in the same direction. A similar analysis shows that the force is repulsive between currents in opposite directions.
This field is uniform along wire 2 and perpendicular to it, and so the force F2 it exerts on wire 2 is given by
F
=
I
l
B
sin
θ
with
sin
θ
=
1
:
F
2
=
I
2
lB
1
.
By Newton’s third law, the forces on the wires are equal in magnitude, and so we just write F for the magnitude of F2. (Note that F1=−F2.) Since the wires are very long, it is convenient to think in terms of F/l, the force per unit length. Substituting the expression for B1 into the last equation and rearranging terms gives
F
l
=
μ
0
I
1
I
2
2
π
r
.
F/l is the force per unit length between two parallel currents I1 and I2 separated by a distance r. The force is attractive if the currents are in the same direction and repulsive if they are in opposite directions. This force is responsible for the pinch effect in electric arcs and plasmas. The force exists whether the currents are in wires or not. In an electric arc, where currents are moving parallel to one another, there is an attraction that squeezes currents into a smaller tube. In large circuit breakers, like those used in neighborhood power distribution systems, the pinch effect can concentrate an arc between plates of a switch trying to break a large current, burn holes, and even ignite the equipment. Another example of the pinch effect is found in the solar plasma, where jets of ionized material, such as solar flares, are shaped by magnetic forces.
Answer:
Distribution lines are low voltage lines which bring electricity from substations to your home. The lines are smaller, and cover shorter distances. The whole distribution network in the US is not directly connected: they are connected through the substations which connect them to the transmission network.
Explanation:
hope it help you