a) write the Irst materials required and procedure
of the experiment to find acceleration of an
objed on an inclined plane
Answers
Answer:
Explanation:
An inclined plane with a pulley
A roller
A pan
A weight box
Spring balance
Spirit level
Strong thread
Half meter scale.
Simulator Procedure (as performed through the Online Labs)
Choose an appropriate environment from the combo box to perform the experiment.
Select a desired angle from the slider, “Angle”.
Increase the loading weights using the slider, “Hanging weight”.
Note the total weights added when the roller just starts moving upward with uniform velocity.
Decrease weights little by little using the same slider and note down the total weights when the roller just starts rolling down with uniform velocity.
To measure the height and length of the inclined plane, click on the button, “Show Scale”.
A reset button is provided to reset the entire experiment anytime.
Real Lab Procedure:
Place the apparatus on a table. Make sure that the base of the inclined plane is at horizontal surface.
Bring the inclined plane to a horizontal position so that the angle of inclination is now zero.
Find the weight of the roller, m using the spring balance. Then, place it on the inclined plane in the middle.
Tie one end of a thread to the roller placed on the inclined plane and pass it over the pulley.
Find the mass of the pan using a beam balance and tie it to the free end of the thread.
Now, raise the inclined plane and fix it at an angle of 30°. When this is done, the roller starts rolling down with acceleration.
Add weights and increase them till the roller just starts moving upward with uniform velocity only on tapping. Note the mass added in the pan and calculate the total mass m1 as sum of mass added in pan and mass of the pan .
Remove some weights from the pan till the roller just starts moving downward with uniform velocity. Note down the mass added in the pan and find the total mass m2 as the sum of mass added in pan and mass of the pan .
The mean value of m1 and m2 multiplied with acceleration due to gravity, g gives the downward force, W acting on the roller of mass m.
It is proved that, in each case, the downward force acting on the body, W is found to be equal to mg sin θ.
A graph is drawn with sin θ along X-axis and W along Y-axis and it is a straight line.
Increase the angle of inclination in steps of 5° each, making it 35°,40°, 45°, 50°,55° and 60° and repeat steps 6 to 8.
Record the observations
Our Observations:
Observed weight of the roller (wo)=.................g wt.
Observed weight of the pan (po)=......................g wt
. Downward force on the body of weight w is equal to mg sin θ.
Graph between sin θ and W comes to be a straight line. Hence