Question

An order to produce a maximum shearine
stress of 75 MN/m in the material of
hollow circular shaft of 25 cm
diameter and 17.5 cm inside diameter. the
torque that should be applied to the shat
Outer
is​

Answer 1

Answer:

In this chapter structural members and machine parts that are in torsion will be

considered. More specifically, the stresses and strains in members of circular cross section

subjected to twisting couples, or torques, T and T' (Fig. 5.1) are analyzed. These couples have a

common magnitude T, and opposite senses. They are vector quantities and can be represented by

couple vectors as shown in Fig.5.1.

Members in torsion are encountered in many engineering applications. The most common

application is provided by transmission shafts, which are used to transmit power from one point

to another. For example, the shaft shown in Fig. 5.1 is used to transmit power from the engine to

the rear wheels of an automobile. These shafts can be solid, as shown in Fig. 5.1, or hollow.