computer is turned on. B. Answer the following: 1. Mention the points to check CD/DVD problems. 2. Which steps can help you to solve the monitor problems? 3. What will you check if the computer is not turning on? 4. What should be checked, if your computer stops responding to your commands? 5. If you are unable to establish the Internet connection, what steps will you take?
Answers
Explanation:
1) Press the windows key + R to open the run dialogue box. step 2-: in the run dialogue box , type devmgmt . msc then press the Enter key . step 3 -: in the device manager window , exchanged DVD / CD - ROM drives .
2)Monitor Troubleshooting
Check to be sure that the Monitor has power and that the light is on.
Check your cables connecting your monitor with your computer. ...
Disconnect all devices except for the mouse, keyboard and monitor. ...
Try connecting the monitor to a different PC using the problem monitor's video cable.
3)Unplug your computer and plug it directly into a wall outlet you know is working, rather than a power strip or battery backup that may be failing. Make sure the power switch on the back of your power supply is flipped on, and if the outlet is connected to a light switch, make sure that switch is turned on too.
4)Check for and download program updates
If, after restarting your computer, the program stops responding again, check for available updates or patches for the program on the developer's website. They may help to address the problem. ... Open the program again and verify if it works correctly.
5)Reboot your network bridge.
Find your cable/DSL modem or T-1 router and power it down. Wait five minutes and turn it back on. Test your Internet connection and if you still do not have access, proceed to the next step.