corrosion of silver what is the mechanism behind this process
Answers
The ferrous ions on the surface of iron are soluble whereas those in solution are oxidized by oxygen to insoluble hydrated oxides of ferric called rust. The rust is formed away from the corroding site. The corrosion rate is very high if the ferrous ion is oxidized to ferric oxide rapidly..
Answer:
The effects of sub-ppm levels of nitrogen dioxide and hydrogen sulfide, and the adsorbed water on the corrosion of silver were studied in order to get a better understanding of the atmospheric corrosion process. An in situ mass balance was taken to monitor the kinetic behavior and the surface and the corrosion film were analyzed by X-ray photoelectron spectroscopy (XPS). In H2S environments, the tarnish film consisted of silver sulfide, and the corrosion rate depended upon oxygen as well as relative humidity. Silver was oxidized by only oxygen and the corrosion behavior conformed to a type of a parabolic law. In NO2 environments, the corrosion filmconsisted of nitrate and oxide, and the corrosion rate depended upon oxygen as well as relative humidity. Compared to hydrogen sulfide, the formation of silver nitrate being strong hydroscopic reduced the effect of humidity on corrosion rate. In H2S + NO2 environment, the corrosion process was independent of both oxygen and humidity, and the kinetic behavior conformed to a linear law. The difference of corrosion process between H2S or NO2 environments and H2S + NO2 environments is thought to be due to the role of nitrogen dioxide as an ionic conductor and the presence of strong oxidizing species such as elemental sulfur which can beproduced from the following reaction: H2S + 2NO(2) --> S + 2HNO(2). In addition, the role of adsorbed water affecting atmospheric corrosion process was mentioned based on the amount of adsorbed water from the three types of exposure environments.
Explanation:
I hope this will help you