Chemistry, asked by barsharanipanda2008, 6 months ago

Describe the process of making silk. for 4 marks

Answers

Answered by Anonymous
33

The process of silk production is known as sericulture. ... Extracting raw silk starts by cultivating the silkworms on mulberry leaves. Once the worms start pupating in their cocoons, these are dissolved in boiling water in order for individual long fibres to be extracted and fed into the spinning reel.

Answered by Aryanshinde1010
13

Answer:

1. Sericulture

This is the term used to describe the process of gathering the silkworms and harvesting the cocoon to collect the materials.

Female silkmoths lay anything from around 300 – 500 eggs at any one time. These eggs eventually hatch to form silkworms, which are incubated in a controlled environment until they hatch into larvae (caterpillars).The silkworms feed continually on a huge amount of mulberry leaves to encourage growth. It takes around 6 weeks to grow to their full potential (about 3 inches). At this time, they’ll stop eating and begin to raise their heads – that’s when they’re ready to spin their cocoon.

Attached to a secure frame or tree, the silkworm will begin spinning its silk cocoon by rotating its body in a figure-8 movement around 300,000 times – a process which takes around 3 to 8 days. Each silkworm produces just one single strand of silk, which measures about 100 metres long and is held together by a type of natural gum, called sericin.

. Thread extraction

Once the silkworms have spun their cocoon, they will eventually enclose themselves inside it and then it’s time to extract the silk threads.

The cocoons are placed into boiling water in order to soften and dissolve the gum that is holding the cocoon together. This is a crucial step in the silk production process as it ensures that there is no damage to the continuity of each thread.Each thread is then carefully reeled from the cocoon in individual long threads, which are then wound on a reel. Some of the sericin may still remain on the threads to protect the fibres during processing, but this is usually washed out with soap and boiling water.

Dyeing

When the silk threads have been washed and degummed, they will be bleached and dried before the dyeing process commences.

Traditional silk dyeing techniques take the dyes from natural resources found in the surrounding environment, such as fruit or indigo plant leaves. The threads will be soaked together in bundles, inside a pot of hot indigo leaves and water. This process will occur multiple times over a span of days to ensure proper colour tone and quality.

However, these traditional dyeing methods have almost become extinct in the commercial manufacturing of silk. Advances in technology mean that manufacturers instead opt for using various dyes such as acid dyes or reactive dyes. This gives a greater range of choice in colours and shades to be able to serve wider demand.

Spinning

The traditional spinning wheel has always, and will always be an integral part of the silk production process. Although updated industrial processes are now able to spin silk threads much quicker, it simply mimics the functions of the classic spinning wheel.The process of spinning essentially unwinds the dyed fibres on to a bobbin, so that they lay flat ready for the weaving process. This can be done in many different ways from hand-spinning to ring-spinning and mule spinning.

Similar questions