Question

describe the two methods of noting time in four sentence​

Answer 1

Answer:

Hi.. I think the methods cannot be described in four sentences. So here is ur answer

The procedure for time study can best be described step-wise, which are self explanatory.

Step 1: Define objective of the study. This involves statement of the use of the result, the precision desired, and the required level of confidence in the estimated time standards.

Step 2: Verify that the standard method and conditions exist for the operation and the operator is properly trained. If need is felt for method study or further training of operator, the same may be completed before starting the time study.

Step 3: Select operator to be studied if there are more than one operator doing the same task.

Step 4: Record information about the standard method, operation, operator, product, equipment, and conditions on the Time Study observation sheet.

Step 5: Divide the operation into reasonably small elements, and record them on the Time Study observation sheet.

Step 6: Time the operator for each of the elements. Record the data for a few number of cycles on the Time Study observation sheet. Use the data to estimate the total number of observations to be taken.

Step 7: Collect and record the data of required number of cycles by timing and rating the operator.

Step 8: Calculate the representative watch time for each element of operation. Multiply it by the rating factor to get normal time.

Normal time = Observed time x Rating factor

Calculate the normal time for the whole operation by adding the normal time of its various elements.

Step 9: Determine allowances for fatigue and various delays.

Step 10: Determine standard time of operation.

Standard time = Normal time + allowances

Hope this helps u :)