draw a circle. centre p and radius 3 cm
Answers
happy holi dear....
Answer:
Step-by-step explanation:
Locate and mark the place where you want the center of your circle.
Determine the radius. It may be a measurement, or a distance between other points on the drawing. Make sure you know exactly how long the radius should be.
Put the compass point and pencil lead close to each other, and make sure they are set to roughly the same length. That will make the circle easier to draw. Tighten the grips on the pencil and compass point.
Widen the arms of the compass to the radius you want, and tighten the hinge at the top (lock the arms).
Re-measure your radius, just to make sure the compass arms did not slip.
Place the metal point of the compass on the mark you made for the center of the circle.
Pressing evenly on the metal point and pencil, turn the knob at the top of the compass, moving the pencil point all the way around the circle. If the circle is too light, do it again, pressing a little harder.
If it was helpful plz mark as brainliest.
