Question

Explain how DMA is used for direct data transfer between memory and peripherals

Answer 1

Answer:

Definition - What does Direct Memory Access (DMA) mean?

Direct memory access (DMA) is a method that allows an input/output (I/O) device to send or receive data directly to or from the main memory, bypassing the CPU to speed up memory operations. The process is managed by a chip known as a DMA controller (DMAC).

In older computers, four DMA channels were numbered 0, 1, 2 and 3. When the 16-bit industry standard architecture (ISA) expansion bus was introduced, channels 5, 6 and 7 were added. ISA was a computer bus standard for IBM-compatible computers, allowing a device to initiate transactions (bus mastering) at a quicker speed. ISA has since been replaced by accelerated graphics port (AGP) and peripheral component interconnect (PCI) expansion cards, which are much faster. Each DMA transfers approximately 2 MB of data per second.

A computer's system resource tools are used for communication between hardware and software. The four types of system resources are:

I/O addresses

Memory addresses

Interrupt request numbers (IRQ)

Direct memory access (DMA) channels

DMA channels are used to communicate data between the peripheral device and the system memory. All four system resources rely on certain lines on a bus. Some lines on the bus are used for IRQs, some for addresses (the I/O addresses and the memory address) and some for DMA channels.

A DMA channel enables a device to transfer data without exposing the CPU to a work overload. Without the DMA channels, the CPU copies every piece of data using a peripheral bus from the I/O device. Using a peripheral bus occupies the CPU during the read/write process and does not allow other work to be performed until the operation is completed.

With DMA, the CPU can process other tasks while data transfer is being performed. The transfer of data is first initiated by the CPU. During the transfer of data between the DMA channel and I/O device, the CPU performs other tasks. When the data transfer is complete, the CPU receives an interrupt request from the DMA controller.