Science, asked by ayaantajammul, 11 months ago

Explain how you could increase current by varying voltage and resistance.

Answers

Answered by rkpandeyn

3

according to ohm s low when voltage is increase the current will increase provided the resistance of the circuit does not change.

Answered by apolinarymdage4

0

Answer:

explain how you. could increase current by varying voltage and resistance

Previous Question

Next Question

Similar questions

Business Studies, 5 months ago

Peter is a production manager in a tyre manufacturing company. Recently he noticed that his team could not achieve the target production of 80 units per day. Instead on an average the production touched the target of only 65 units. On thorough analysis he found out that the deviation between standard production and actual production is far beyond acceptable range, on overall analysis he...

Science, 5 months ago

I Fill in the Blanks. ___________ is a growth - promoting plant harmone.

English, 5 months ago

complete the following sentence with a suitable infinites English is difficult – the shoes are comfortable Dash...

English, 11 months ago

She has not obtained pass marks in Persian. Change into passive voice.

Math, 11 months ago

If sinA =1/3x and tanA=X/3. Then find the value of (x^2-1/x^2)...

Science, 1 year ago

A plank with a box on it at one end is gradually raised about the other end. As the angle of inclination with the horizontal reaches 30°, the box starts to slip and slides 4.0 m down the plank in 4.0 s. The coefficients of static and kinetic friction between the box and the plank will be, respectively :...

Science, 1 year ago

A npn transistor is connected to common emitter configuration in a given amplifier. A load resistance of 800Ω is connected in the collector circuit and the voltage drop across it is 0.8V. If the current amplification factor is 0.96 and the input resistance of the circuit is 192Ω, the voltage gain and the power gain of the amplifier will respectively be :...

Science, 1 year ago

A cylindrical metallic rod in thermal contact with two reservoirs of heat at its two ends conducts a amount of heat Q in time t. The metallic rod is melted and the material is formed into a rod of half the radius of the original rod. What is the amount of heat conducted by the new rod, when placed in thermal contact with the two reservoirs in time t ?