How does an induction motor starts
Answers
Answer:
A three phase Induction Motor is Self Starting. When the supply is connected to the stator of a three-phase induction motor, a rotating magnetic field is produced, and the rotor starts rotating and the induction motor starts. At the time of starting, the motor slip is unity, and the starting current is very
Answer:
A three phase Induction Motor is SelfStarting. When the supply is connected to the stator of a three-phase induction motor, a rotating magnetic field is produced, and the rotor starts rotating and the induction motor starts. At the time of starting, the motor slip is unity, and the starting current is very large.
The purpose of a starter is not to just start the motor, but it performs the two main functions. They are as follows.
To reduce the heavy starting current
To provide overload and under voltage protection.
The three phase induction motor may be started by connecting the motor directly to the full voltage of the supply. The motor can also be started by applying a reduced voltage to the motor when the motor is started.
The torque of the induction motor is proportional to the square of the applied voltage.Thus, a greater torque is exerted by a motor when it is started on full voltage than when it is started on the reduced voltage.
There are three main methods of Starting of Cage Induction Motor. They are as follows.
Direct on line starter
The direct on line starter method, of an induction motor is simple and economical. In this method, the starter is connected directly to supply voltage. By this method small motors up to 5 kW rating is started to avoid the supply voltage fluctuation.
Star delta starter
The star delta starter method of starting three phase induction motors is very common and widely used among all the methods. In this method, the motor runs at delta connected stator windings.
Auto transformer starter
The Auto transformer is used in both the type of the connections, i.e., either star connected or delta connected. The auto transformer is used to limit the starting current of the induction motor.
The above three starters are used for cage rotor induction motor.