Question

How is silk obtained? explain the process step by step

Answer 1

STEP 1     Young silk worms prefer tender young mulberry leaves fed 3 times a day.
On average, 36,000 worms consume 1 ton of mulberry leaf over their lifetime. The silk worms increase in length by more than 40 times (approx. 3 inches) within 20 days of their feeding time and shed their skin 4 times in the process. When the silk worms are ready to spin, they are put into a round basket covered by cloth to keep them free from flies.      STEP 2       After the worms are completely transformed into cocoons, the cocoons are put into hot, almost boiling water. The filaments from several cocoons are then reeled together on a wooden spindle into a uniform strand of raw silk. Each Thai silk cocoon can give about 700 yards long of filament.          STEP 3     Thai silk yarns must be washed and degummed by immersing the skeins in large tubs of hot water then dried under the sun. Dyes are prepared in a dye bath. Once the dye is ready, the clean yarns are then immerse in the dye bath and boil with constant rotation of the yarn. The dyed yarns are hung in the shade to dry before they can be spun.       STEP 4       Thai silk yarns are then spun by hands on wooden or plastic tubes to be prepared for warp or weft. To make heavier silk, two or more weft yarns are reeled together by hands to make a thicker silk yarn. The more number of weft yarn reeled together, the heavier the silk fabric becomes. The term "ply" i.e. 2-ply, 4-ply, 6-ply is often used to indicate the weight of Thai silk fabric.          STEP 5     After the warp and weft are prepared, the loom is set and the weaving can begin. Most of the Thai silk is hand-woven which gives it a lustrous sheen and slightly uneven texture that distinguishes it from the sleek machine-woven fabric. Weaving silk by hand loom is a rather time consuming and require special skill. A skilled weaver can weave a few inches a day on a very complicated weave. A fast weaver can weave up to a maximum of 9-10 yards a day for a simple plain weave.    

Answer 2

Answer:

STEP 1: A female silkmoth lays hundreds of eggs.

STEP 2: These eggs hatch to form caterpillars or silkworms.

STEP 3: They eat mulberry leaves for 25-30 days and grow bigger in size.

STEP 4: They form a cocoon excreting saliva from their mouth.

STEP 5: These cocoons are boiled or exposed to steam and silk fibers get separate out.

STEP 6: The process of taking out threads from the cocoon for used as silk is called rearing of silk.

THESE ARE THE STEPS FOR OBTAINING SILK.

HOPE IT HELPS!!