How to draw a bar graph?
Answers
Answer:
draw a line in left on paper and down on paper then write the values on left side
Step-by-step explanation:
Collect your data. The first thing you have to do is to collect all of your data. Remember that a bar graph should show a comparison among categories. Let's say your goal is to organize data on how many inches of rainfall a city received between the months of February 2005 and February 2006. You'll need to find out exactly how much rain fell during each of the months. Once you have this data, you can begin to draw the graph.
Another use of rectangular bars on a graph is called a "histogram", not "bar graph", to display a continuous range of data in increasing or decreasing value in a list of equally divided range segments to show how these compare. For example, if you were to measure how many people in a classroom fell into a range of heights, and one range was 5 feet (1.5 m) to 5 feet 3 inches (7.6 cm), and so on, then you'd need to use a histogram.
Draw an x and a y-axis. This will look like a large "L" shape. Bar charts are often drawn when one set of data is expressed as a set of categories (which can be periods of time), in which case this set will be the base. The other axis will be values (sales, costs, grades, scores, production amounts, other quantities, etc) for the base categories, groups or periods
Label the x-axis. Divide the number of squares (convenient units) across the page by the number of bars you need to draw to find the width of each bar. If this gives a fraction, round down to the nearest whole number. If the bars do not touch, choose a convenient space and leave this blank between the pairs of bars, often from an appropriate beginning point, such as January, or a certain year. In this example, you should label the x-axis with the names of each of the months you will be using. Let's say you're looking at the months between February of 2005 and February of 2006.[3]
Label the bottom axis. After you've marked down all of the months that you'll be categorizing, you can give the entire axis a label. In this case, let's label the axis "Months".
Label the y-axis. Divide the highest value of all the bars by the number of squares left above the bottom axis to find what each square represents. If this is a fraction, round up to the nearest whole number. Label the point where the axes meet as 0. Each square above 0 increases by the calculated amount until the value is equal to or greater than the largest vertical bar. If you're working with inches of rain, and your range of rainfall falls from between 10 inches (25.4 cm) and 70 inches (177.8 cm), then it will make sense to label the vertical axis in increments of ten, starting with 0, then 10, then 20, then 30, and so on.
Draw your bars. Extend the base you have marked on the bottom axis to the horizontal line labelled with the value of that bar. If the value falls between two lines, approximate where the correct value would lie. Notice that bars are normally separated (not continuous), as they are comparing the value of different but comparable events, unless this is a distribution (histogram).rff
For example, if the rain fell to 30 inches (76.2 cm) in February of 2005, then raise the bar up to 30 inches (76.2 cm). If it fell 20 inches (50.8 cm) in March of 2005, then draw the bar accordingly.