Question

How to find diameter of lap riveted joint from thickness of plate?

Answer 1

$\boxed{Explained\:Answer}$

______________________________

The diameter of the rivet hole is usually 1.5 mm larger than the nominal diameter of the rivet.

The plates are drilled together and then separated to remove any burrs or chips so as to have a tight flush joint between the plates.

Answer 2

Answer:

The diameter of the rivet hole is usually 1.5 mm larger than the nominal diameter of the rivet.

The plates are drilled together and then separated to remove any burrs or chips so as to have a tight flush joint between the plates.