How to know what ampere of male plug is to be used to operate an electric iron so as to avoid damaging of the plug?
Answers
Answered by
0
Remove the cover from the plug
Remove the outer sheath from the flex to expose the inner cores. Take care not to damage the inner cores while removing the sheath
Shorten the brown wire
Remove the insulation from the ends of the wires
Twist the strands of wire together
Feed the wires under the strain relief into the plug
Double over the ends of the wires
Insert the brown wire into the live (L) screw terminal and screw tight
Insert the green/yellow wire into the earth (E) screw terminal and screw tight
Insert the blue wire into the neutral (N) screw terminal and screw tight
Tighten the screws of the strain relief over the sheath (not the cores!) of the flex
qwerty160811:
but
Similar questions