Question

How will you make a pinhole camera?Explain its working.

Answer 1

A pinhole camera is the simplest camera possible. It consists of a light-proof box, some sort of film and a pinhole. The pinhole is simply an extremely small hole like you would make with the tip of a pin in a piece of thick aluminum foil.

A pinhole camera works on a simple principle. Imagine you are inside a large, dark, room-sized box containing a pinhole. Imagine that outside the room is a friend with a flashlight, and he is shining the flashlight at different angles through the pinhole. When you look at the wall opposite the pinhole, what you will see is a small dot created by the flashlight's beam shining through the pinhole. The small dot will move as your friend moves his flashlight. The smaller the pinhole (within limits), the smaller and sharper the point of light that the flashlight creates.

Now imagine that you take your large, dark, pinhole-equipped room outside and you point it at a nice landscape scene. When you look at the wall opposite the pinhole, what you will see is an inverted and reversed image of the scene outside. Each point in the scene emits light, and, just like the flashlight, the beam of light from that point passes through the pinhole and creates a point of light on the back wall. All of the points in the scene do that at the same time, so an entire image, in focus, is created on the back wall of the room. The image is very dim because the pinhole is so small, but you can see it if the room is very dark.

A pinhole camera is simply a smaller version of that room, and the film inside the camera replaces you. The film records the image that comes in through the pinhole. The camera records a nice, in-focus image of the scene that you point the camera at. Usually, you have to expose the film for a long time because the pinhole lets so little light through.

The pinhole in a pinhole camera acts as the lens. The pinhole forces every point emitting light in the scene to form a small point on the film, so the image is crisp. The reason a normal camera uses a lens rather than a pinhole is because the lens creates a much larger hole through which light can make it onto the film, meaning the film can be exposed faster.

See the next page for more information on using and building pinhole cameras.

Answer 2

SUPPLY LIST

• a sharp pencil
• an empty shoe box with a lid
• an X-Acto knife (ask an adult)
• scissors
• a ruler
• wax paper
• tape
• a blanket

method.



STEP 1

Use the point of a sharp pencil to punch a hole in one of the shorter ends of the shoe box.



STEP 2

Ask an adult to use an X-Acto knife to cut a square in the opposite end of the box, directly across from the hole. The square should measure 2 inches (5.08 centimeters) on each side.

STEP 3

Use scissors to cut a square of wax paper that measures 3 inches (7.62 centimeters) on each side.

STEP 4

Place the wax paper directly over the square you cut in the box. Tape the edges of the wax paper to the box.



STEP 5

Take the camera box to a dimly lit room and turn on a lamp. Stand about 5 feet (1.5 meters) from the lamp.

STEP 6

Cover your head and pinhole camera with a blanket. Be sure that the end with the wax paper is facing you and the end with the pinhole is facing the lamp.

STEP 7

Hold your pinhole camera at arms length from your face and aim it at the lamp. Keep it steady until you see an upside-down image of the lamp.



WHAT'S HAPPENING?

In a real camera, the lens is like the tiny hole you made in the box and creates a backward, upside-down image. Like the little hole, the lens lets in light. The wax paper is like film in a real camera, which has special chemicals on it. When the light hits the film, the chemicals start changing and turn the image into a photo.