Ip address identifies a specific network, how to determine different hosts and networks that can be addressed
Answers
Addresses in IPv4 are 32-bits long. This allows for a maximum of 4,294,967,296 (232) unique addresses. Addresses in IPv6 are 128-bits, which allows for 3.4 x 1038 (2128) unique addresses.
The total usable address pool of both versions is reduced by various reserved addresses and other considerations.
IP addresses are binary numbers but are typically expressed in decimal form (IPv4) or hexadecimal form (IPv6) to make reading and using them easier for humans.
IP stands for Internet Protocol and describes a set of standards and requirements for creating and transmitting data packets, or datagrams, across networks. The Internet Protocol (IP) is part of the Internet layer of the Internet protocol suite. In the OSI model, IP would be considered part of the network layer. IP is traditionally used in conjunction with a higher-level protocol, most notably TCP. The IP standard is governed by RFC 791.
The Internet Protocol (IP)
How IP Works
IP is designed to work over a dynamic network. This means that IP must work without a central directory or monitor, and that it cannot rely upon specific links or nodes existing. IP is a connectionless protocol that is datagram-oriented., so each packet must contain the source IP address , destination IP address, and other data in the header to be successfully delivered.
Combined, these factors make IP an unreliable, best effort delivery protocol. Error correction is handled by upper level protocols instead. These protocols include TCP, which is a connection-oriented protocol, and UDP, which is a connectionless protocol.
Answer:
Addresses in IPv4 are 32-bits long. This allows for a maximum of 4,294,967,296 (232) unique addresses. Addresses in IPv6 are 128-bits, which allows for 3.4 x 1038 (2128) unique addresses.
The total usable address pool of both versions is reduced by various reserved addresses and other considerations.
IP addresses are binary numbers but are typically expressed in decimal form (IPv4) or hexadecimal form (IPv6) to make reading and using them easier for humans.
IP stands for Internet Protocol and describes a set of standards and requirements for creating and transmitting data packets, or datagrams, across networks. The Internet Protocol (IP) is part of the Internet layer of the Internet protocol suite. In the OSI model, IP would be considered part of the network layer. IP is traditionally used in conjunction with a higher-level protocol, most notably TCP. The IP standard is governed by RFC 791.
The Internet Protocol (IP)
How IP Works
IP is designed to work over a dynamic network. This means that IP must work without a central directory or monitor and that it cannot rely upon specific links or nodes existing. IP is a connectionless protocol that is datagram-oriented., so each packet must contain the source IP address, destination IP address, and other data in the header to be successfully delivered.
Combined, these factors make IP an unreliable, best-effort delivery protocol. Error correction is handled by upper-level protocols instead. These protocols include TCP, which is a connection-oriented protocol, and UDP, which is a connectionless protocol.
Explanation: