mixer grinder safety rules
Answers
Answer:
Always switch off your juicer mixer grinder before you remove the jars to check if the ingredients have been ground well. Don’t leave the switch on and thrust your hand into the jar.
Ensure that the mixer grinder is placed on a level surface when it is in operation.
Ensure that there is a gap of a minute at the minimum after you have run the mixer grinder continuously for about two-three minutes.
Don’t overload the jars with ingredients; the quantity should not cross the 3/4th mark of the juicer mixer grinder.
Never use the mixer jar without making sure that the lid is firmly in place.
Make sure that the jar fits in/locks in with the appliance before you operate it. Most mixer grinders come with a safety lock.
Keep the mixer grinder jars dry once you have finished using them for the day.
Buy a juicer mixer grinder that comes with an overload protection feature which can protect the appliance from getting damaged or overheated.
For stainless steel pressure cookers too, you would need to follow some safety measures. Some of them are as below:
Make sure that there is adequate water at the base of the cooker. Allow some steam to escape from the vent before you put the weight on the lid.
Ensure that the vents are clear and that the gasket is firm and stays in shape. There should be no stuck food particles on any part of the lid, especially near the steam vent or the gasket. Clean all the parts from time to time. If the gasket has any kind of cracks or is broken, replace it soon.
Explanation:
Mark me brainlist......
