Question

Response area A type cable used in the networking of compute?

Answer 1

Answer:

It depends on network's protocol, size, and topology and many other factors,

1. Depending on the above criteria, there are different cables available to fit the network requirement.

For school/small networks usually people select UTP(Unshielded Twisted Pair) cable which comes with different quality options from telephone cable to high-speed cables.

And selection of this type cable is also depend on the speed and usage field, speed ranging from 1 Mbps to 10,000 Mbps. and Use range from Voice calls to Gigabit Ethernet internet speed.

But the disadvantage with this type is, it is susceptible to radio and electrical frequency interference.

2. If you want to overcome this drawback then you can go for Shielded Twisted Pair (STP) Cable

which is another catagory of network cable.

In both of the above 2 types of cables there will be layers of conducotrs which are twisted together,

3. If you want to support greater cable lengths between network devices than twisted pair cables

then you can consider another category of cable, which is Coaxial cable.with high resistant to singal interference.

4.But modern day cables are providing high performance, very low signal loss and also very high resistence to signal interference.

and which are suitable for most of the requirements of networking. They are none other than Optical Fibre Cable or shortly OFC

They have the ability to the ability to transmit signals over much longer distances than any of the other acble types listed above.

and also at a very very high speed.

Explanation: