Question

The first part of this module on safety rules and maintenance in the use of

hand tools ( like screwdrivers, calipers, steel rule, scribers, dividers, punches,

hammers and files ) were kept on telling you to: (1) be sure that tools are in good

working condition before using them; and (2) use tools for their intended use /

purpose only.After reading and understanding this latter part, what other reminders can

you give or share to preserve the hand tools and to protect the worker? Give

at least two and write your answers in your notebook.

1. _____________________________________________________________________

2. _____________________________________________________________________​

Answer 1

Answer:

• Workers should never carry tools up or down a ladder in a way that inhibits grip. Ideally, tools should be hoisted up and down using a bucket or strong bag, rather than being carried by the worker.
• Tools should always be carefully handed from one employee to another – never tossed. Pointed tools should be passed either in their carrier or with the handles toward the receiver.
• Workers carrying large tools or equipment on their shoulders should pay close attention to clearances when turning and maneuvering around the workplace.
• Pointed tools such as chisels and screwdrivers should never be carried in a worker’s pocket. Accept­able ways to carry them include in a toolbox, pointed down in a tool belt or pocket tool pouch, or in the hand with the tip always held away from the body

Answer 2

Answer:

Ensure that employees are properly trained in the safe use of hand tools.

Always provide training on how to choose the right tool for the job, how to correctly use each tool, and how to identify when tools need repair.

Select the right tool for the job. Substitutes increase the chance of having an accident.

Use tools designed to allow wrist to stay straight. Avoid using hand tools with your wrist bent.

Use good quality tools.

Keep tools in good condition at all times.

Inspect tools for defects before use. Replace or repair defective tools.

Keep cutting tools sharp and cover sharp edges with a suitable covering to protect the tool and to prevent injuries from unintended contact.

Replace cracked, splintered, or broken handles on files, hammers, screwdrivers, or sledges.

Ensure that the handles of tools like hammers and axes fit tightly into the head of the tool.

Replace worn jaws on wrenches, pipe tools and pliers.

Redress burred or mushroomed heads of striking tools.

Pull on a wrench or pliers. Never push unless you hold the tool with your palm open.

Point sharp tools (e.g., saws, chisels, knives) laying on benches away from aisles and handles should not extend over the edge of the bench top.

Maintain tools carefully. Keep them clean and dry, and store them properly after each use.

Carry tools in a sturdy tool box to and from the worksite.

Wear safety glasses or goggles, or a faceshield (with safety glasses or goggles) and well-fitting gloves appropriate for the hazards to which you may be exposed when doing various tasks.

Keep the work environment clean and tidy to avoid clutter which may cause accidents.

Use a heavy belt or apron and hang tools pointed down at your sides, not behind your back.

Keep the work space tidy. Store tools properly when not in use.

Explanation:

Select as you wish ✨