To determine the resistance of a galvanometer by half deflection method observations
Answers
Aim
To determine resistance of a galvanometer by half-deflection method and to find its figure of merit.
Apparatus
A weston type galvanometer, a voltmeter, a battery or battery eliminator, two (10,000 Ω and 200 Ω) resistance boxes, two one-way keys, a rheostat, a screw gauge, a metre scale, an ammeter of given range, connecting wires and a piece of sand paper.Procedure
(a) Resistance of galvanometer by half deflection method
Make the connections accordingly as shown in circuit diagram.
See that all plugs of the resistance boxes are tight.
Take out the high resistance (say 2000 Ω) from the resistance box R and insert the key K1 only.
Adjust the value of R so that deflection is maximum, even in number and within the scale.
Note the deflection. Let it be θ.
Insert the key also and without changing the value of R, adjust the value of S, such that deflection in the galvanometer reduces to exactly half the value obtained in step 5 i.e., θ/2.
Note the value of resistance S.
Repeat steps 4 to 7 three times taking out different values of R and adjusting S every time.
(b) Figure of merit
Take one cell of the battery (battery eliminator) and find its E.M.F. by a voltmeter by connecting +ve of the voltmeter with +ve of the cell and -ve of voltmeter with -ve of the cell. Let it be E.
Make connections as in circuit diagram.
Adjust the value of R to obtain a certain deflection 0 (say 30 divisions) when the circuit is closed.
Note the values of resistance R and deflection θ.
Now change the value of R and note the galvanometer deflection again.
Repeat the steps 9 to 13 with both cells of the battery with different voltages like 2, 4, 6, 8, volts from battery eliminator.
Find the figure of merit k using the formula.