what are the different components of hard disk explain each of them
Answers
Answer:
HEY!!! HERE'S YOUR ANSWER
Explanation:
Platters
The platters are the circular discs inside the hard drive where the 1s and 0s that make up your files are stored. Platters are made out of aluminum, glass or ceramic and have a magnetic surface in order to permanently store data. On larger hard drives, several platters are used to increase the overall capacity of the drive. Data is stored on the the platters in tracks, sectors and cylinders to keep it organized and easier to find.
The Spindle
The spindle keeps the platters in position and rotates them as required. The revolutions-per-minute rating determines how fast data can be written to and read from the hard drive. A typical internal desktop drive runs at 7,200 RPM, though faster and slower speeds are available. The spindle keeps the platters at a fixed distance apart from each other to enable the read/write arm to gain access. (ref 1+3)
The Read/Write Arm
The read/write arm controls the movement of the read/write heads, which do the actual reading and writing on the disk platters by converting the magnetic surface into an electric current. The arm makes sure the heads are in the right position based on the data that needs to be accessed or written; it's also known as the head arm or actuator arm. There is typically one read/write head for every platter side, which floats 3 to 20 millionths of an inch above the platter surface.
Actuator
The actuator or head actuator is a small motor that takes instructions from the drive's circuit board to control the movement of the read/write arm and supervise the transfer of data to and from the platters. It's responsible for ensuring the read/write heads are in exactly the right place at all times.
Other Components
As well as the casing on the outside of the hard disk that holds all of the components together, the front-end circuit board controls input and output signals in tandem with the ports at the end of the drive. No matter what the type of drive, it has one port for a power supply and one port for transferring data and instructions to and from the rest of the system.