Question

what happened to the ladder?
A.it broke
B.it bent
C.it cracked
D.it slipped​

Answer 1

Explanation:

what happened to the ladder?

A.it broke

B.it bent

C.it cracked

D.it slipped

from which chapter dear

Answer 2

Answer:

When should you inspect ladders?

Inspect new ladders promptly upon receipt.

Inspect ladders before each use.

Check the condition of ladders that have been dropped or have fallen before using them again.

Inspect ladders before storing to make sure they are in good condition to store, or need repair, replacement or remove from the site.

What should you look for when inspecting any ladder?

missing or loose steps or rungs (they are loose if you can move them by hand)

damaged or worn non-slip feet

loose nails, screws, bolts or nuts

loose or faulty spreaders, locks, and other metal parts in poor repair

rot, decay or warped rails in wooden ladders

cracks and exposed fibreglass in fibreglass ladders

cracked, split, worn or broken rails, braces, steps or rungs

sharp edges on rails and rungs

rough or splintered surfaces

corrosion, rust, oxidization and excessive wear, especially on treads

twisted or distorted rails. Check ladders for distortion by sighting along the rails. Using a twisted or bowed ladder is hazardous.

missing identification labels

What other things should I look for when inspecting stepladders?

wobble

loose or bent hinges and hinge spreaders

broken stop on a hinge spreader

loose pail shelf

What should you look for when inspecting extension ladders?

loose, broken or missing extension locks

defective locks that do not set properly when ladder is extended

sufficient lubrication of working parts

defective cords, chains and ropes

missing or defective pads or sleeves