What is first and second generation cellular phones in data communication?
Answers
Answered by
3
"Digital traffic channels: The most notable difference between the two generations is that first generation systems are almost purely analog, where as second generation systems are digital. In particular, the first generation systems are designed to support voice channels using FM; digital traffic is supported only by the use of a modem that converts the digital data into analog form. Second generation systems provide digital traffic channels. These readily support digital data; voice traffic is first encoded in digital form before transmitting. Of course, for second generation systems, the user traffic (data or digitized voice) must be converted to an analog signal for transmission between the mobile unit and the base station. Encryption: Because all of the user traffic, as well as control traffic, is digitized in second generation systems, it is a relatively simple matter to encrypt all of the traffic to prevent eavesdropping. All second generation systems provide this capability, whereas first generation systems send user traffic in the clear, providing no security. Error detection and correction: The digital traffic stream of second generation systems also lends itself to the use of error detection and correction techniques. The result can be very clear voice reception. Channel access: In first generation systems, each cell supports a number of channels. At any given time a channel is allocated to only one user. Second generation systems also provide multiple channels per cell, but each channel is dynamically shared by a number of users using time division multiple access (TDMA) or code division multiple access (CDMA)."
Answered by
0
Answer:
1G stands for first generation and 2G stands for second generation are the 2 generations of mobile phones. 1G is that the 1st generation of mobile phones that brought 1st wireless communication to United States. 1G uses associate degree analog signal for communications and use FDMA for channelisation.
Similar questions