What is the minimum pitch distance? *
Answers
Answer:
As per IS 80 0:2007, Cl No: 10.2. 3.2, the limits on Pitch in case of bolted connection are: Minimum Pitch = 2.5 times the nominal diameter of the bolt
Explanation:
Linear measurement. "Pitch" is used to measure the distance between repeated elements in a structure possessing translational symmetry:
Pitch is center to centre spacing of bolts in a row, measured along the direction of load. Distance between centre to centre of fasteners shall not exceed 2.5 times the nominal diameter of fasteners.
Maximum pitch distance is the distance between centre of any two adjacent fasteners that should not exceed 32t or 300mm, whichever is less where t is the thickness of the thinner plate.
The maximum pitch of the bolts for a compression member shouldn't be more than 12t or 200mm whichever is less.
Pitch on gear, the distance between a point on one tooth and the corresponding point on an adjacent tooth.
Pitch on screw the distance between turns of a screw thread.
Answer:
The minimum pitch distance is 2.5 times the nominal diameter of fastener.
Explanation:
- Pitch is defined as the center to centre distance between bolts in a row, measured along the direction of load.
- The distance between the fasteners' centres must not be greater than 2.5 times their nominal diameter.
- Pitch distance is defined as the absolute difference between the congruent and incongruent pitch intervals between the tone preceding the TS and the tone before it.
- The ability to assess sounds as 'higher' and 'lower' in the sense associated with musical melodies is known as pitch.
- Pitch is a perceptual feature of sounds that allows their ordering on a frequency-related scale.
#SPJ6