English, asked by lopezpaullopezyt, 7 months ago

when and where should safety be applied ?​

Answers

Answered by cutiepie008
2

The Basics of Safety

Through several years of investigating accidents and research in the field of accident reconstruction, leaders in the field of occupational accident prevention have concluded that there are specific reasons why accidents occur. They found that worker safety is dependent on worker behavior and human factors. They developed ten safety rules and, while many of you may have heard them before, they are worth repeating:

STAY ALERT - and stay alive. The more awake a worker is, the less likely he or she is to get hurt. If you are unsure how to operate equipment or perform a task, ask your supervisor. Don't guess and muddle through. Make sure you know in advance the correct, safe way to do it.

WEAR THE RIGHT CLOTHES - work clothes should fit properly. Anything that can catch in machinery or trip you up is hazardous. Wear protective clothing and equipment as required.

USE THE RIGHT TOOLS - if you need a hammer, get a hammer. It may be handier to use a pair of pliers, wrench or screw driver, but you are more likely to get injured.

LEARN HOW TO LIFT - Lifting takes more than muscle; it is an art. Don't try to show how strong you are; you may end up in a hospital. Get help to handle anything that is too heavy or cumbersome for you.

DON'T BE A PRANKSTER - practical jokes and horseplay can be dangerous, especially around heavy machinery. If you feel the urge to play, resist it until after work.

BE TIDY - Good housekeeping reduces hazards in the workplace or your home. Always put away tools when they are not in use. Keep the floors clean, pick up scraps and wipe up spills. A slip or trip can be fatal.

REPORTING IS IMPORTANT - Never fail to report accidents, defective equipment and or unsafe conditions.

GET FIRST AID IMMEDIATELY - if you're hurt - even if it seems minor. Neglect of an injury may lead to serious infection, weeks of lost time, and possibly permanent injury.

BACK YOUR SAFETY PROGRAM - If you have an idea you believe will reduce accidents, tell your supervisor about it. Set an example by obeying safety rules. Cooperate with your safety committee.

NEVER TAKE A CHANCE - Next to sheer carelessness, short cuts are probably the biggest killer of all. To save a minute or two, you may lose a lifetime. Whatever you are doing, if you are not doing it safely, you are not doing it right!

Excerpted with permission from Utah Safety Council Newsletter, August 2010

If you have questions about the specific safe work practices and procedures that apply to your work activities, please be sure to bring them to the attention of your supervisor. For additional information, please call Environmental Health and Safety, 208-885-6524.

Might this help you

Please mark as brainliest ✌

Similar questions