Question

write the properties of plastic​

Answer 1

• Strength
• Fire Resistance.
• Dimensional Stability.
• Working Conditions.

Hope it's help you

Answer 2

Answer:

The properties of plastic are -

1. STRENGTH

The plastics are sufficiently strong and can be used for load bearing structural members. The strength of plastics can further be increased by reinforcing them with various fibrous materials.

Plastic as structural material has not gained much popularity because of the following resins.

High cost of constructionHigh temperature susceptibilityPoor stiffnessBeing subjected to creep under constant load2. WEATHER RESISTANCE

The plastics, prepared from phenolic resins, are only good in resisting weather effects. Certain plastics are seriously affected by ultraviolet light.

3. FIRE RESISTANCE

Plastics, being organic in nature, are combustible. But the resistance to fire temperatue depends upon the plastic structure.

Cellulose acetale plastics burn slowly.Polyvinyl chloride (PVC) plastics are non-inflammable.Phenol formaldehyde and urea formaldehyde plastics are used as fire proofing materials.4. DURABILITY

Plastics generally possess sufficient durability, provided they offer sufficient surface hardness. Thermoplastic varieties are found to be attacked by termites and rodents.

5. DIMENSIONAL STABILITY

Plastics easily maintain its shape and do not go under plastic deformations.

6. CHEMICAL RESISTANCE

Plastics offer great resistance to moisture, chemicals and solvents. Many plastics are found to possess excellent corrosion resistance. Plastics are used to convey chemicals.

7. THERMAL RESISTANCE

The plastics have low thermal conductivity and therefore foamed or expanded varieties of plastics are used as thermal insulators.

8. WORKING CONDITIONS

All operations like drilling, sawing, punching, clamping etc are carried out easily on plastics, just like wood.

9. MOISTURE RESISTANCE

This property depends upon variety of plastics used, for example, cellulose plastics are considerably affected by the presence of moisture, whereas polyvinyl chloride plastics offer high resistance to moisture.

10. DUCTILITY

Plastics, generally, have low ductility and hence plastic structural members may fail without prior warning.

11. MISCELLANEOUS PROPERTIES

In addition to above properties, plastics have following qualities.

Plastics are available in variety of colors, both opaque and transparent.Plastics possess excellent insulating property, so used as electric insulators.Plastics are clean, light and shining, so they need not be given any finish such as painting, polishing etc.Normally thermo-plastics have low melting point and cannot be used where temperature or heat condition persists.They possess good optical and sound absorption qualities.

Explanation:

Hope it helps you ☺