Computer Science, asked by afhamsaya, 5 months ago

Considering Dot matrix display write an assembly language code such that, first 2 characters of your middle name should display on dot matrix display (display one character at a time).

Answers

Answered by sunilkumar29102

0

Answer:

jcubkufiyoyyohpuuuu u can re the uteruttujbjg

Previous Question

Next Question

Similar questions

Math, 2 months ago

Find the perimeter of rectange ABCD. If AB= 5cm and AD =3cm...

Hindi, 2 months ago

गद्यांश का उपयुक्त शीर्षक दीजिए- - संसार एक कर्मभूमि। - संसार। - कर्मभूमि । - इनमें से कोई नहीं।...

Social Sciences, 2 months ago

Chloroform was the first medicine to be effectively used in ___...

English, 5 months ago

Samy starts walking straight facing west. After walking some distance, she takes a left turn and after walking some distance she again takes a left turn. Which direction is she facing now? hos...

Chemistry, 5 months ago

25. A metal is strongly heated in presence of air to form a black mass. So the metal is (a) Potassium (b) Platinum (c) Copper (d) Zinc...

Chemistry, 10 months ago

In a series LCR circuit with an AC source, R = 300 Ω, C = 20 μF, L = 1.0 henry, εrms = 50 V and ν = 50/π Hz. Find (a) the rms current in the circuit and (b) the rms potential difference across the capacitor, the resistor and the inductor. Note that the sum of the rms potential differences across the three elements is greater than the rms voltage of the source.

Physics, 10 months ago

An inductance of 2.0 H, a capacitance of 18μF and a resistance of 10 kΩ are connected to an AC source of 20 V with adjustable frequency. (a) What frequency should be chosen to maximise the current in the circuit? (b) What is the value of this maximum current?

Physics, 10 months ago

A capacitor of capacitance 10 μF is connected to an oscillator with output voltage ε = (10 V) sin ωt. Find the peak currents in the circuit for ω = 10 s−1, 100 s−1, 500 s−1 and 1000 s−1.