Math, asked by soumendrapradhan47, 5 months ago

Find the perimeter of the following figure.

Attachments:

Answers

Answered by shivbabaashadevi

1

Answer:

13.5 because we will add all sider

2.5+3.5+2.5+5=13.5

Step-by-step explanation:

Mark me brainlyest say thank and follow

Answered by anuragkumar8432rupdi

0

Answer:

13.5

$perimeter \: of \: any \: closed \: polygon \: = \: \: sum \: of \: a ll \: side \:$

Previous Question

Next Question

Similar questions

Math, 2 months ago

Find the remainder when p(x) = 4x^3 - 12x^2 + 14x - 3 is divided by (x-1/2) and verify the result by actual division method...

Math, 2 months ago

The area of trapizeum is 475cm2 and it's hight it's 19cm find the length of its two paraller sides of one side is 40cm greater than the other...

Math, 2 months ago

write any rational numbers below - 2 and 0...

Computer Science, 5 months ago

To create an abselute cell reference ______ sign is used before the parts of formula.

English, 5 months ago

name the famous speech of Mother Teresa...

Physics, 11 months ago

A metal wire of resistance 3Ω is elongated to make a uniform wire of double its previous length. The new wire is now bent and the ends joined to make a circle. If two points on this circle make an angle 60º at the centre, the equivalent resistance between these two points will be: (A) (12/5)Ω (B) (5/3)Ω (C) (5/2)Ω (D) (7/2)Ω...

Physics, 11 months ago

The resistive network shown below is connected to a D.C. source of 16 V. The power consumed by the network is 4 Watt. The value of R is: (A) 8 Ω (B) 6 Ω (B) 16 Ω (D) 1 Ω...

Physics, 11 months ago

In an experiment, brass and steel wires of length 1 m each with areas of cross section 1 mm² are used. The wires are connected in series and one end of the combined wire is connected to a rigid support and other end is subjected to elongation. The stress requires to produced a new elongation of 0.2 mm is [Given, the Young’s Modulus for steel and brass are respectively 120 × 10⁹ N/m² and 60 × 10⁹...