Multiple Choice Questions
1 A networking device which is used to connect multiple network hosts is:
(a) CPU
(bhub
10) firewall
converts digital signals to analog signals and vice versa.
a router
(b) bridge
(c) modem
3.
Internet is an example of
Network
(a) Local Area
(b) Campus Area
(c) Wide Area
-
A topology in which every device is connected to other device is called
(a) ning topology
(b) mesh topology (c) star topology
5. It transmits data in the form of light rather than electric signals
(aCoaxial cable
(b) Optical fibre cable (c) Ethernet cable
Fill in the blanks.
1. The process of connecting computers together into a network is called
2 A
specifies a set of rules that governs the data communication
3. A
has no geographical limit
is an electrical cable with a conductor at its centre
B.
5
topology has no start and end point.
State True or False.
1
Each computer in a network is called a node
CAN covers an area smaller than MAN
2.
5.
3 Each computer in a network must have a LAN card inside it.
In star topology, all computers are connected via a cable that circles
in aning
Computer networking is known to be very flexible.
Write one word for the following.
1. Process of connecting computers together
2. The physical path through which the message travels
3. It is responsible for routing traffic
D.
Answers
Answer:
@$=#%&#%/=^'ggdcgwtrhnmbgbn
Answer:
MCQ:
1. Network Hub
2. Modem
3. Wide Area Network
4. Mesh topology
5. Optical fiber cable
Step-by-step explanation:
MCQ:
1. Network hubs are networking devices that link up various network hosts. Data transport also uses a network hub.
2. A modem is a component that allows a computer to transmit or receive data across cable or telephone lines. In contrast to a telephone line or cable wire, which can only carry analogue data, the data saved on a computer is digital. The modem's primary job is to transform digital signals between analogue and digital and vice versa.
3. The most fundamental WAN is the Internet, which links all computers in the world. A WAN is often owned and maintained by a number of administrators or the general public due to its extensive reach.
4.In a mesh topology, every device on the network is connected to every other device via a specific point-to-point link.
5. It is a fiber optic cable, which means that rather than electrical impulses, it delivers data in the form of light signals.
Blanks:
1. The process of connecting computers together into a network is called internet.
A network is created when two or more computers are linked so they can communicate with one another. A network is created when two or more computers are linked so they can communicate with one another. The Internet is the world's biggest computer network.
2. A specifies a set of rules that governs the data communication is called a protocol.
A set of guidelines called a protocol governs communication. A sender, a receiver, and a method by which the message is sent from the sender to the receiver are the fundamental elements of communication.
When choosing a communication, there are a number of elements to consider.
In order to engage and correctly interpret the exact sentence while there is contact, certain laws and regulations must be upheld by both the sender and the recipient.
3. A population has no geographical limit.
4. Coaxial cable is an electrical cable with a conductor at its center.
5. Bus topology has no start and end point.
Bus topology, often called line topology, is a type of network topology in which each device is connected to the network by a single coaxial or RJ-45 network wire. The bus, backbone, or trunk is the single cable that serves as the conduit for all data transmission between devices.
True or False:
1. Each computer in a network is called a node. -True
Any physical tool that can send, receive, or forward data is referred to as a node in a network of other tools. The most prevalent node type is a personal computer. The computer node or internet node is what it is called.
2. CAN covers an area smaller than MAN. - True
A group of interconnected local area networks (LANs) in a specific geographic area is known as a campus area network (CAN). A CAN is a smaller network than a MANET (MAN)
3. Each computer in a network must have a LAN card inside it. - True.
The network interface card used by the device to connect to the network is known as a LAN Card. A LAN card's main purpose is to establish a connection to a network. LAN cards come in wired (conductive) and wireless varieties.
4. In star topology, all computers are connected via a cable that circles. - True.
Each network component in a star topology network is physically connected to a hub, router, or switch as the center node.
5. Computer networking is known to be very flexible. - True.
#SPJ2