Question

Weave plain and twill weaves using paper strips

Answer 1

1-Get inspired and choose materials. To get yourself started, you may want to visit a craft store. You can weave placemats out of ribbons, construction paper, heavier types of paper, and incorporate decorative materials like glitter, sequins, the sky is the limit. When you are done collecting supplies, be sure you have at least the basics - scissors, construction paper, glue, ruler, and laminating sheets if you want to preserve your placemats.

2-Cut one inch (2.5 cm) wide strips of construction paper (your choice of colors). Start by cutting long strips in your chosen colors. For this tutorial, it is recommended that you cut 9 strips that are 12 inches in length. (Use the ruler.)

Advertisement

3-Cut the next batch of strips shorter than the first batch. Because you have 9 strips that are 1 inch wide, each strip in this next batch needs to be 9 inches long to create rectangle.

4-Place the long strips horizontally and weave the short strips vertically.

Glue or tape the ends of horizontal strips to one of the vertical strips, alternating top and bottom attachments.

Weave the remaining vertical strips, securing their ends to the top and bottom horizontal strips.

5-Trim the edges. Alternately, you can cut the strips a bit long to start with, and leave the ends sticking out a bit, on purpose.

Advertisement

6-Laminate if desired. You can cover this project with clear contact paper to protect it for longer use, whether or not you mat it.

Answer 2

Answer:

Weaving paper strips into plain and twill weaves can be a fun and creative project.

Explanation:

Materials:

Paper strips (different colors or patterns for variety)

Scissors

Tape

Ruler

Pencil

Plain Weave:

• Cut your paper strips into even lengths. The length and width of your strips will determine the size of your finished project.
• Take two strips of paper and tape one end of each strip to a flat surface.
• Weave the second strip over and under the first strip until you reach the end of the strip.
• Secure the end of the second strip to the first strip with a small piece of tape.
• Continue weaving in this manner, alternating over and under until you have woven all of your strips.
• Once you have finished weaving, secure the ends of your paper strips with tape.

Twill Weave:

• Cut your paper strips into even lengths. The length and width of your strips will determine the size of your finished project.
• Take two strips of paper and tape one end of each strip to a flat surface.
• Weave the second strip over the first strip and under the second strip. Repeat this pattern until you reach the end of the strip.
• Secure the end of the second strip to the first strip with a small piece of tape.
• Take a new strip of paper and begin weaving it under the second strip and over the third strip.
• Continue weaving in this pattern, always weaving under and over the previous strip, until you have woven all of your strips.
• Once you have finished weaving, secure the ends of your paper strips with tape.

To learn more about weave from the given link:

https://brainly.in/question/54649508

https://brainly.in/question/5883851

#SPJ3