what is positive zero error ? how do you calculate the diameter if threre is positive zero error.
Answers
Answer:
When the zeroth division on the vernier scale appears on the right side of zero of the main scale , the error is called positive zero error.
If the zero lines, marked on a circular scale, is below the reference line of the main scale, then there is a positive zero error and the correction is negative. In figure 5th, circular scale division is coinciding with the reference line. ∴ Correction = – Coinciding division of C.S. × L.C.
Step-by-step explanation:
Hint: Solution lies in the vernier calipers. Vernier calipers are widely used in laboratory(physics) to determine the diameter of things. The vernier calipers are having main scale and the vernier. There are two types of zero error when it indicates behind the zero position then negative zero error and opposite when indicated on the other side of zero.
Complete step-by-step answer:
Before we proceed to the solution it is important to know about the zero error and their two types.
There are two types or error
Zero error positive
Zero error negative
Zero error positive: Positive zero error refers to the case when the jaws of the vernier caliper are just closed and the reading is a positive reading away from the actual reading of 0.00 mm. If the reading is 0.10 mm, the zero error is referred to as +0.10 mm.
Here in the diagram we can see that zero error positive is shown. Whenever the scale reading is on the positive side of the zero of the main scale zero error positive occurs. Error because the vernier scale is not in the equal position of main scale. For example in the given diagram
Zero error = 0.8−0.72 =+0.08cm
Additional Information:
Zero error negative: Negative zero error refers to the case when the jaws of the vernier caliper are just closed and the reading is a negative reading away from the actual reading of 0.00 mm. If the reading is 0.08 mm, the zero error is referred to as -0.08 mm. For example in the given diagram
Zero error =-(0.36-0.3)cm which is equal to -0.06cm
Note: Vernier is a secondary scale used for extra precision. It was invented in 1631 by French mathematician Pierre vernier.
Vernier scale is used for calculating Internal, External Diameter of an object and depth or height of an object.
Least Count of Vernier caliper is 0.01cm
The Vernier calipers are extremely precise measuring instruments and the reading error is 0.05mm. The main sources of error include scale misleading or parallax effect, excessive measuring force causing jaw tilt, thermal expansions caused by temperature difference between caliper and work piece, and small hole diameter error caused by inside jaw offset.
130.8k+ views
Related Questions
Least count of Vernier calliper is:
A: Maximum measurement on main scale/Total number of division on the scale
B: Minimum measurement on main scale/ total number of divisions on Vernier scale
C: Maximum count on scale/ Minimum count on scale
D: None of these
There are two Vernier callipers both of which have 1cm divided into 10 equal divisions on the main scale. The vernier scale of one of the callipers (C1) has 10 equal divisions that correspond to 9 main scale divisions. The vernier scale of the other calliper (C2) has 10 equal divisions that correspond to 11 main scale divisions. The readings of the two callipers are shown in the figure. The measured values (in cm) by callipers C1 and C2 respectively are:
(A) 2.87 and 2.87
(B) 2.87 and 2.83
(C) 2.85 and 2.82
(D) 2.87 and 2.86
Show More Question