what would be the modulation index for an amplitude modulated wave for which the maximum amplitude is Alfa while the minimum amplitude is b?
Answers
Modulation indices are described for various forms of modulation. The amplitude modulation, AM, modulation index can be defined as the measure of extent of amplitude variation about an un-modulated carrier.
As with other modulation indices, the modulation index for amplitude modulation, AM, indicates the amount by which the modulated carrier varies around its static un-modulated level.
When expressed as a percentage it is the same as the depth of modulation. In other words it can be expressed as:
Where:
A is the carrier amplitude.
M is the modulation amplitude and is the peak change in the RF amplitude from its unmodulated value.
From this it can be seen that for an AM modulation index of 0.5, the modulation causes the signal to increase by a factor of 0.5 and decrease to 0.5 of its original level.
Amplitude modulation depthA complementary figure to modulation index is also used for amplitude modulation signals. Known as the modulation depth, it is typically the modulation index expressed as a percentage.
Thus a modulation index of 0.5 would be expressed as a modulation depth of 50%, etc.
However often the two terms and figures are used interchangeably and figures for a modulation index of 50% are often seen where the index is 0.5.
Modulation index / modulation depth examples
Typically the modulation index of a signal will vary as the modulating signal intensity varies. However some static values enable the various levels to visualised more easily.
Amplitude modulated index of 0.5
When the modulation index reaches 1.0, i.e. a modulation depth of 100%, the carrier level falls to zero and rise to twice its non-modulated level.
Amplitude modulated index of 1.0
Any increase of the modulation index above 1.0, i.e. 100% modulation depth causes over-modulation. The carrier experiences 180° phase reversals where the carrier level would try to go below the zero point. These phase reversals give rise to additional sidebands resulting from the phase reversals (phase modulation) that extend out, in theory to infinity. This can cause serious interference to other users if not filtered.
Amplitude modulated index of more than 1.0
i.e. over-modulated
Broadcast stations in particular take measures to ensure that the carries of their transmissions never become over modulated. The transmitters incorporate limiters to prevent more than 100% modulation. Hover they also normally incorporate automatic audio gain controls to keep the audio levels such that near 100% modulation levels are achieved for most of the time.
in physics, the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path. ... Waves are generated by vibrating sources, their amplitude being proportional to the amplitude of the source.
in physics, the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path. ... Waves are generated by vibrating sources, their amplitude being proportional to the amplitude of the source.
in physics, the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path. ... Waves are generated by vibrating sources, their amplitude being proportional to the amplitude of the source.